View XC2173CM61MR-G_7469173.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/10 xc2173 series ics for use with crystal oscillators (pll built - in) ? ? ? ? ? pin number pin name function 1 /inh stand-by control* 2 xt crystal oscillator connection (input) 3 vss gnd 4 q0 clock output 5 vdd power supply 6 /xt crystal oscillator connection (output) /standard clock input /i nh ?h? or open ?l (stand-by) q0 divider / multiplier output high impedance general description the xc2173 series are high frequency, low power consumption cmos ics with built-in crystal oscillator, divider and clock multiplier pll circuits. output is selectable from any one of the following values for f0: f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2 , f0/4, f0/8. with an oscillation capacitor & oscillation feedback resistor built-in, a stable oscillator circuit can be put together u sing only an external crystal oscillator. by connecting an external standard clock, the abov e mentioned output frequencies can be achieved. a pplications ? crystal oscillation modules ? computer, dsp clocks ? communication equipment ? various system clocks pin configuration pin assignment * stand-by control pin has a pull-up resistor built-in. inh, q0 pin function "h" = high level "l" = low level features oscillation frequency : 10mhz ~ 25mhz divider ratio : f0/2, f0/4, f0/8 multiplier : f0 x 5, f0 x 6, f0 x 7, f0 x 8 output : 3-state operating voltage range : 3.3v ? 10% and 5.0v ? 10% small consumption current : stand-by function included* * oscillation continues in stand-by cmos output frequency : 80mhz ~ 160mhz (5.0v) : 50mhz ~ 125mhz (3.3v) divider circuit & pll circuit built-in oscillation capacitor & oscillatio n feedback resistor built-in package : sot-26 environmentally friendly ? ? : eu rohs compliant, pb free ?? etr1504_001a
2/10 xc2173 series designator description symbol description ? duty level c : cmos (vdd/2) m : multiplier output ? output capacity d : divider output 2 : f0 / 2 4 : f0 / 4 5 : f0 x 5 6 : f0 x 6 7 : f0 x 7 ? multiplier or divider ratio 8 : f0 / 8 & f0 x 8 ? input oscillation frequency 1 : 10mhz ~ 25mhz ???? packages taping type (*2) mr-g : sot-26 parameter symbol conditions units supply voltage v dd v ss -0.3 ? v ss +7.0 v input voltage v in v ss -0.3 ? v dd +0.3 v power dissipation pd 250 (*) mw operating temperature range topr -40 ? +85 ? storage temperature range ts t g -55 ? +125 ? product classification ? ordering information block diagram a bsolute maximum ratings * when measured on a glass epoxy pcb xc2173 ???????? ? *1 e (*1) the ?-g? suffix indicates that the products are hal ogen and antimony free as well as being fully rohs compliant. (*2) the device orientation is fixed in its embossed tape pocket. for reverse orientatio n, please contact your local torex sales office o r representative. (standard orientation: ? r- ? , reverse orientation: ? l- ? )
3/10 xc2173 series parameter symbol conditions min. typ. max. units operating voltage v dd 2.97 3.30 3.63 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =2.97v, i oh =-8ma 2.47 - - v 'l' level output voltage v ol cmos: v dd =2.97v, i ol =8ma - - 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=80mhz - 10 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=80mhz - 1 - ma input pull-up resistance 1 rup1 /i nh ="l" 1.0 2.0 4.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 35 70 140 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 0.3 1.0 2.0 m
output off leak current i oz /i nh ="l" - - 10 a parameter symbol conditions min. typ. max. units operating voltage v dd 4.5 5.0 5.5 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =4.5v, i oh =-16ma 3.9 4.2 - v 'l' level output voltage v ol cmos: v dd =4.5v, i ol =16ma - 0.3 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=160mhz - 35 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=160mhz - 5 - ma input pull-up resistance 1 rup1 /inh="l" 0.5 1.0 2.0 m
input pull-up resistance 2 rup2 /inh=0.7v dd 25 50 100 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 100 240 400 k
output off leak current i oz /i nh ="l" - - 10 a electrical characteristics 3.3v, f0 x 8 multiplier (*1) ta = 2 5 ? 5.0v, f0 x 8 multiplier (*2) ta = 2 5 ? *1: output frequency range is 80 mhz to 125mhz with a multiplier of f0 x 8 at 3.3v *2: output frequency range is 80 mhz to 160mhz with a multiplier of f0 x 8 at 5.0v *3: r&d value
4/10 xc2173 series parameter symbol conditions min. typ. max. units operating voltage v dd 2.97 3.30 3.63 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =2.97v, i oh =-8ma 2.47 - - v 'l' level output voltage v ol cmos: v dd =2.97v, i ol =8ma - - 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=70mhz - 9 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=70mhz - 1 - ma input pull-up resistance 1 rup1 /i nh ="l" 1.0 2.0 4.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 35 70 140 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 0.3 1.0 2.0 m
output off leak current i oz /i nh ="l" - - 10 a parameter symbol conditions min. typ. max. units operating voltage v dd 4.5 5.0 5.5 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =4.5v, i oh =-16ma 3.9 4.2 - v 'l' level output voltage v ol cmos: v dd =4.5v, i ol =16ma - 0.3 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=140mhz - 28 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=140mhz - 5 - ma input pull-up resistance 1 rup1 /i nh ="l" 0.5 1.0 2.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 25 50 100 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 100 240 400 k
output off leak current i oz /i nh ="l" - - 10 a 3.3v, f0 x 7 multiplier (*1) ta = 2 5 ? 5.0v, f0 x 7 multiplier (*2) ta = 2 5 ? *1 : output frequency range is 70 mhz to 125mhz with a multiplier of f0 x 7 at 3.3v *2 : output frequency range is 80 mhz to 160mhz with a multiplier of f0 x 7 at 5.0v *3 : r&d value electrical characteristics (continued)
5/10 xc2173 series parameter symbol conditions min. typ. max. units operating voltage v dd 2.97 3.30 3.63 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =2.97v, i oh =-8ma 2.47 - - v 'l' level output voltage v ol cmos: v dd =2.97v, i ol =8ma - - 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=60mhz - 8 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=60mhz - 1 - ma input pull-up resistance 1 rup1 /i nh ="l" 1.0 2.0 4.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 35 70 140 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 0.3 1.0 2.0 m
output off leak current i oz /i nh ="l" - - 10 a parameter symbol conditions min. typ. max. units operating voltage v dd 4.5 5.0 5.5 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =4.5v, i oh =-16ma 3.9 4.2 - v 'l' level output voltage v ol cmos: v dd =4.5v, i ol =16ma - 0.3 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=120mhz - 23 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=120mhz - 5 - ma input pull-up resistance 1 rup1 /i nh ="l" 0.5 1.0 2.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 25 50 100 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 100 240 400 k
output off leak current i oz /i nh ="l" - - 10 a 3.3v, f0 x 6 multiplier (*1) ta = 2 5 ? 5.0v, f0 x 6 multiplier (*2) ta = 2 5 ? *1: output frequency range is 60 mhz to 125mhz with a multiplier of f0 x 6 at 3.3v *2: output frequency range is 80 mhz to 150mhz with a multiplier of f0 x 6 at 5.0v *3:r&d value electrical characteristics (continued)
6/10 xc2173 series parameter symbol conditions min. typ. max. units operating voltage v dd 2.97 3.30 3.63 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =2.97v, i oh =-8ma 2.47 - - v 'l' level output voltage v ol cmos: v dd =2.97v, i ol =8ma - - 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=50mhz - 7 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=50mhz - 1 - ma input pull-up resistance 1 rup1 /i nh ="l" 1.0 2.0 4.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 35 70 140 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 0.3 1.0 2.0 m
output off leak current i oz /i nh ="l" - - 10 a parameter symbol conditions min. typ. max. units operating voltage v dd 4.5 5.0 5.5 v 'h' level input voltage v ih 2.4 - - v 'l' level input voltage v il - - 0.4 v 'h' level output voltage v oh cmos: v dd =4.5v, i oh =-16ma 3.9 4.2 - v 'l' level output voltage v ol cmos: v dd =4.5v, i ol =16ma - 0.3 0.4 v supply current 1 i dd 1 /i nh ="open", c l =15pf, f=100mhz - 23 - ma supply current 2 i dd 2 /i nh ="l", c l =15pf, f=100mhz - 5 - ma input pull-up resistance 1 rup1 /i nh ="l" 0.5 1.0 2.0 m
input pull-up resistance 2 rup2 /i nh =0.7v dd 25 50 100 k
cg (*3) - 13 - pf internal oscillation capacitance cd (*3) - 13 - pf internal oscillation feedback resistance rf 100 240 400 k
output off leak current i oz /i nh ="l" - - 10 a 3.3v, f0 x 5 multiplier (*1) ta = 2 5 ? 5.0v, f0 x 5 multiplier (*2) ta = 2 5 ? *1: output frequency range is 50 mhz to 125mhz with a multiplier of f0 x 5 at 3.3v *2: output frequency range is 80 mhz to 125mhz with a multiplier of f0 x 5 at 5.0v *3: r&d value electrical characteristics (continued)
7/10 xc2173 series parameter symbol conditions min. typ. max. units output rise time tr c l =15pf, 0.1v dd ~ 0.9v dd (*1) - 2.0 - ns output fall time tf c l =15pf, 0.9v dd ~ 0.1v dd (*1) - 2.0 - ns output duty cycle duty cmos: 0.5v dd , c l =15pf 45 - 55 ? output disable delay time tplz c l =15pf (*1) - - 100 ns output enable delay time tpzl c l =15pf (*1) - - 100 ns jitter tj 1 (*1) - 50 - ps parameter symbol conditions min. typ. max. units output rise time tr c l =15pf, 0.1v dd ~ 0.9v dd (*1) - 1.5 - ns output fall time tf c l =15pf, 0.9v dd ~ 0.1v dd (*1) - 1.5 - ns output duty cycle duty cmos: 0.5v dd , c l =15pf 45 - 55 ? output disable delay time tplz c l =15pf (*1) - - 100 ns output enable delay time tpzl c l =15pf (*1) - - 100 ns jitter tj 1 (*1) - 50 - ps switching characteristics 3.3v ta = 2 5 ? 5.0v ta = 2 5 ? *1 : r&d value
8/10 xc2173 series 1) cmos level: tr , tf , duty switching characteristics 2) output disable/enable delay time *) /inh pin input waveform: tr = tf = less than 10 ns
9/10 xc2173 series ? ? ? ? mark output m multiplier d divider mark ratio mark ratio 2 f0/2 6 f0 x 6 4 f0/4 7 f0 x 7 5 f0/5 8 f0/8 & f0 x 8 mark 7 packaging information ? sot-26 marking rule ? represents product series ? represents output ? represents assembly lot number. (based on internal standards) ? represents multiplier and/or divider ratio ? sot-26
10/10 xc2173 series 1. the products and product specifications cont ained herein are subject to change without notice to improve performance characteristic s. consult us, or our representatives before use, to confirm that the informat ion in this datasheet is up to date. 2. we assume no responsibility for any infri ngement of patents, pat ent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. the products in this datasheet are not devel oped, designed, or approved for use with such equipment whose failure of malfuncti on can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. atomic energy; aerospace; transpor t; combustion and associated safety equipment thereof.) 5. please use the products listed in this datasheet within the specified ranges. should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. we assume no responsibility for damage or loss due to abnormal use. 7. all rights reserved. no part of this dat asheet may be copied or reproduced without the prior permission of torex semiconductor ltd.

▲Up To Search▲

Price & Availability of XC2173CM61MR-G

	To Download XC2173CM61MR-G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .